I went back to the track yesterday, Sept 20, and was hoping to at least get into 1:21.x and 1:20.x if I'm lucky. Unfortunately, that didn't happen. There was plenty of traffic and I could only get a few clean laps in. My recorded best of the day was 1:23.2 with plenty of 1:23.x laps throughout the day. This is 1.2 seconds slower than my last track day best of 1:22.0 (Post: Track Progress & Goals ) but on my best lap, I had to get on the brakes on the front straight due to traffic so I know I would have been in the 1:22's. I also had a friend with me in the car during most of the sessions and I had a best time of 1:23.4 while he was in the car. I don't know how to adjust for additional weight on our track (or any other track for that matter) but if we use the rule of thumb for 1/4 mile drag racing, 0.1 sec/100 lb, that would be 0.64 sec/100 lb for our 1.6 mile track. My friend is around 200 lb. so that should be worth approximately 1.3 second which would mea
Last year, I picked up a 2009 Lancer Ralliart to do a long term test with it as a dual duty track/daily. One of the first things I knew I was going to do was put a decent set of tires on it. The car came without OEM wheels which was actually good because I didn't have to hesitate about getting a good set of aftermarket wheels to support going wider. Thankfully, my friends at YST Auto Halifax set me up with a great set of Superspeed RF03RR wheels. The Wheels I had never even heard of Superspeed but I trusted the good folk at YST Auto who mentioned some customer cars running on track with them. These wheels are rotary forged which is basically a prerequisite to be taken seriously in this market populated by companies like TSW and Fast Wheels. The wheels looked like a high quality, well finished wheel and each had a "QC" check sticker on. Just for appearances? Maybe, but I found no defects. The wheels seemed easy to balance (didn't need many weights) and at 18.1 lb. f